How To Hook Two Hydraulic Valves Together?

Question

Hooking two hydraulic valves together involves a complex procedure aimed at allowing multiple valves to work in tandem within a hydraulic system. This task is often necessary for systems requiring multiple functionalities, like directional control and pressure relief, to operate concurrently. The interconnection of these valves needs to be carried out with precision, as the valves must align correctly in terms of hydraulic flow and pressure specifications. Specific tubing, connectors, and possibly manifold blocks are usually needed to physically and functionally link the valves. The process demands thorough understanding of hydraulic schematics, valve specifications, and safety protocols to ensure optimal system performance.

Accepted Answer

If you don’t understand hydraulic systems, hooking up two hydraulic valves together can be a bit of a brain twister but I will tell you the truth that it isn’t so hard. This is required when combining a directional control valve with pressure relief valve among others places where complex control is necessary. It’s just that you are making a system where one cannot do the job alone; they have to be in pairs somehow. Here’s how you can set them up to play nicely together.

Tools and Materials You'll Need:

A set of wrenches
 	Tape (PTFE) or pipe thread sealant
 	Hydraulic hoses and fittings
 	Perhaps some sort of manifold block
 	Pressure gauge
 	Safety equipment (safety glasses, gloves, etc.)

Safety First: When working on this system, ensure you have released any pressurized fluid and also put on the right safety gear. The last thing you need is hydraulic oil all over your face!

Procedure:

Plan Your Layout: Before setting out, figure out how the valves will be connected. Consider flow paths as well as pressure settings and examine physical layout. If necessary draw a picture now because it will help avoid headaches later on.
 	Check Compatibility: See whether the two valves match each other in terms of pressure as well as flow rate. No one wants to find themselves with another one capable of handling 3000 PSI while his partner taps out at 2000 PSI.
 	Valve Positioning: Decide about how these valves should be positioned depending on your case. In certain cases, multiple valves may be mounted using some manifold block while in simpler versions these might rather be directly connected by means of hydraulics lines.
 	Prepare the Connections: Use PTFE tape or pipe thread sealant over the threads on your hydraulic fittings so that the joints won’t leak.
 	Connect the Valves: Now make a connection between them. At first loosely attach hoses to outlet of first valve and inlet of the second. Once you have all things in place, tighten fittings securely using a wrench.
 	Install a Pressure Gauge: If one of your valves happens to be a pressure relief or control valve, then it might be worth having a pressure gauge installed downstream. It will allow for precise adjustments and monitoring of the hydraulic set up.
 	Test for Leaks: Check every connection again before pressurizing the system. Reintroduce tension slowly only after that you are sure that there are no any leaks. In case you find them, fix immediately.
 	Calibrate the Valves: Now is time to calibrate your system according to what it wants from you with everything hooked up and leak free. This may mean moving an aperture in a direction control valve or determining release pressures on safety relief valves among other things.
 	System Test: After calibrating both valves properly we can now get right into testing this system out as desired by both users. Fine tune as necessary.
 	Documentation: Write down what you did. Keep track of the models, settings and any difficulties experienced while doing so because it can help when troubleshooting later on.

There you have it, a step-by-step rundown on hooking up two hydraulic valves. Remember that different models could have different requirements; hence always check manufacturer’s instructions for each valve that you are working with. And if in doubt don’t hesitate to seek help from professionals like me

Hydraulic Pump Questions and Answers

How to Set Hydraulic Pump Pressure on 100 Hitachi Excavator？

contact us

product