If you have been in possession of a Komatsu Wb150 (or WB130) backhoe after 2005, you might be having diverging feelings with your machine – notably, about its hydraulics. This blog post will explain the possible reasons behind the problems and what remedies one can opt for.
Causes of a Komatsu Wb150 Backhoe Hydraulic Problem
There are possible reasons that can be pointed out if you have hydraulic problems with your Komatsu Wb150 backhoe. Among the most common causes of a Komatsu Wb150 backhoe having hydraulic failure, broken seals, worn-out components and contamination.
Checking oil and fluid levels frequently, replacing seals where necessary as well as cleaning the engine and housing will help avoid such complications. Should there still be trouble, contact a technician from Komatsu service department for help.
Komatsu Wb150 Backhoe Hydraulic Low Fluid
Your Komatsu Wb150 Backhoe Hydraulic system might be experiencing some problems and you could use this information to get the solution that will work for you.
- Check the oil level. Make sure it shows correct amount and on its right mark on the machine. Low oil can cause many problems with your hydraulic system. Remember to check it every time you use your machine.
- Check seals as well; worn out or damaged seals may be why your hydraulics aren’t working correctly. Seals should be replaced when necessary, in case of need they are easy to replace by yourself too.
- Examine hoses also; sometimes hoses become brittle with age and lead to leaks along other hydraulic issues. Where needed, replace any of your hoses that show such signs as wear and tear.
- Clean and lube appropriately Because the hydraulic system of your Komatsu Wb150 Backhoe is in a dirty environment, corrosion occurs over time due to its usage, both leading to other issues. You can maintain it well through periodic cleaning say twice a month using a good cleaner plus lubricant!
Komatsu Wb150 Backhoe Hydraulic Leaks
Just because your Komatsu Wb150 Backhoe Hydraulic system is having problems doesn’t mean you have to panic. Just follow the advice in this article and your machine will be able to operate again soon, and without long-term damage.
Several reasons may make the Komatsu Wb150 Backhoe hydraulic systems malfunction. The common cause of this malfunctioning is a faulty hydraulic pump which is often due to water getting into the engine, affecting its performance.
If your machine begins to run roughly or make strange noises, it could be leaking hydraulic fluid. Checking for leaks is very easy – just open up your hydraulics system and look for any pools of liquid on the ground or inside the engine. If there are any leaks that you spot deal with them immediately as they might put your backhoe out of action.
Air in the Komatsu Wb150 Backhoe Hydraulic Lines
- If there is air in the hydraulic lines for Komatsu Wb 150 backhoe then there is a potential for danger.
- Examples of common causes of air entering hydraulic lines would be poor installation, wrong kinds of maintenance or even leakage from systems.
- Therefore it is essential to correctly diagnose and prevent hydraulic line problems to ensure safe operation of your backhoe.
- Whenever you are experiencing challenges with your hydraulic systems, our Komatsu Inc team will guide you through them until they are settled. We have got your back!
Worn Komatsu Wb150 Backhoe Hydraulic Seals
If you are experiencing hydraulic issues with your Komatsu Wb150 Backhoe, one of the reasons may be wear out of its hydraulic seals. This may cause loss of power in the backhoe and make it uncontrollable or even not to work at all.
Below are tips on how to fix hydraulic problems with your Komatsu Wb150 Backhoe:
- Check oil volume and replace where necessary.
- Clean and inspect gear box and transmissions.
- Disconnect and clean the air bleeds check for leaks.
- Inspect seals for signs of wear or any other damage; if any exists change them as soon as possible.
- Ensure all connectors and hoses are intact without sign of fatigue or cracks; those damaged ones should be replaced as well as those showing signs of wearing off.
Bent Komatsu Wb150 Backhoe Hydraulic Rods or Valves
There could be a number of reasons why Komatsu wb150 backhoe hydraulic rods or valves become faulty. The commonest issue is presence of bent rods or valves. Some steps can be taken to solve the problem when you find any bent rod or valve within your backhoe hydraulic.
While it may be tempting to attempt repairing the rod or valve by yourself, it’s normally advisable that you seek help from an expert. A qualified mechanic will replace the defective rod or valve and they will equally identify other mechanical problems which might have contributed to the malfunctioning.
If you don’t want to take time fixing the rod or valve by yourself, you would always call a professional services provider. These providers mostly repair your backhoe hydraulics at an affordable price and also give a warranty for all repairs made.
How to Fix a Komatsu Wb150 Backhoe Hydraulic Problem
In the event that you may have to repair the device, some of these steps should be taken if you are having problems with your Komatsu Wb150 backhoe hydraulics:
Maintain the oil level
Regular lubrication is required for most backhoes to work effectively; therefore, ensure that the machine is filled with oil before it is used.
Check for damaged parts
It could be that certain parts of your Komatsu Wb150 Backhoe are starting to wear off while others got spoilt somehow. If you observe any of such issues, make haste and fix them.
Troubleshoot the hydraulic system
If this doesn’t help either, it’s time to try troubleshooting the hydraulic system. Sometimes swapping out particular components or recalibrating the machinery’s sensors can be enough.
Take care of your machine
The Komatsu Wb150 Backhoe has been in use for a long time now and may show signs of aging soon hence start caring for it so as to prolong its life span. Periodically inspect the equipment to find early signs of any faults.
Check by hand commands
Ensure that a number of manual controls on your Komatsu Wb150 Backhoe are working well before using this mulch hopper again. For instance, angle adjustment knobs and blade brake control might require some fixing or replacement completely.
Komatsu wb150 backhoe hydraulic pump is required, click to ask for price
How to Prevent Komatsu Wb150 Backhoe Hydraulic Problems
Komatsu offers a wide range of backhoe models that are used to perform various tasks such as construction, excavation and demolition.
Backhoe hydraulic problems can occur when the machine is in use, or when it is not properly maintained. Here are some common Komatsu backhoe hydraulic problems and their solutions:
1. Backhoe doesn’t start
Check if the fuel is clean and dry. If the carburetor needs to be cleaned, do so before starting the machine.
2. Blocks don’t move
This can be caused by a clog in the hydraulic system or an incorrect linkage. In order to fix this problem, you will need to remove the blocks and check for clogs. If there is a clog, you will need to use a pump to clear it.
3. Machine won’t go forward or backward
This can be caused by worn out parts or defective assembly. To fix this problem, you will need to replace the parts or repair the assembly.
4. Machine won’t turn
This could be caused by a broken steering gear or a misaligned frontaxle . To fix this problem, you will need to replace either the gear or the axle or both.
5. Machine will run, but won’t move
This can be caused by a broken transmission . To fix this problem, you will need to replace the transmission
6. Machine has low power
this may be caused by an engine wear problem
7. Machine is hard to start
If you have started your machine through the use of raw fuel and gasoline, it is possible that you have siphoned some into the air intake .
Related Reading：
English
Russian
French
German
Portuguese
Spanish