It is quite a task for any business to handle Cat 303 hydraulic problems and find answers to them. Besides the problem’s root cause, you must also be able to solve it before long so as not to disappoint your clients. This piece will highlight some of the main issues with Cat 303 machines and what can be done about them.
Cat 303 Hydraulic Leaks
Is your hydraulic system in a Cat 303 giving you a hard time? No need to worry; we got some answers for you!
One of the major causes of leakages in hydraulics is erosion. Erosion can occur either inside the pipe or on the seals that hold it together with the pump. If it remains untreated, this corrosion can cause leaks.
Ensure that your system is free from corrosive materials and debris to avoid corrosion. To help keep your system safe, add anti-corrosion chemicals.
When you do have a hydraulic leak, don’t run helter-skelter. You can go through some steps to correct it. Firstly, trace the leak back to its origin. Secondly, use sealant to fix it up. Lastly, replace all spoilt parts.
In case you need help in repairing your hydraulic systems just call us! We are always ready to assist you and sort out any issues you might have encountered
Cat 303 Hydraulic Lock-Up
When your cat has problems with its hydraulic locks it is possible to correct it by doing several things.
You should see if the batteries of the cat are still okay. In this scenario, it might be a problem with the hydraulics themselves; change batteries that are running short in capacity.
The other case is when the batteries remain fine and there could be another issue regarding the hydraulics. You may need to check whether the fluid level is accurate and ascertain if all hoses as well as connectors have been fitted correctly.
Improper reservoir Cat 303 Hydraulic oil level
If your Cat 303 hydraulic system starts to experience some difficulties, there are a few things you can do. First of all, check if the reservoir is full. If it isn’t, add more oil by using the pump. Secondly, inspect the seals on the reservoir and on the pump. They will leak oil if they are destroyed or worn out. Lastly ensure that the oil level and temperature are checked to make sure that the pump is functioning properly.
The height adjustment has gone wrong; this means that you have a problem with your Cat 303 system. This can be due to wearing out of adjustment mechanism or a faulty component among other factors leading to this problem. In such situations, you need to repair or replace your adjustment in order for your case to be sorted out as well as it needs a technician’s help. Therefore should there be any indication of danger consult a professional in order for him/her/they correct whatever might have led to those problems again it could need assistance from an expert who will handle it as required once more requiring service from an expert
The Cat 303 hydraulic pump is completely shot
We apologize, but it seems that our cat 303 hydraulic pump has been busted and we will have to get a new one. Despite having tried our hand at the commonest tricks in vain.
If you’re going through similar problems with your cat 303 hydraulic pump, do not despair. There are several cures available and they are described below.
The first thing is for you to check if the pump has enough lubrication. This is particularly important if the pump stayed idle for a long time.
Then change the seal of the pump head. In case of failure, changing whole head of pump might be necessary.
Last option involves taking your cat 303 hydraulic pump to a mechanic when all else fails. Thanks for reading!
Cat 303 Hydraulic Undercarriage Wear
There are a few widely shared issues that can crop up when your cat uses its hydraulic system. This article will discuss some of the most frequent problems and how to sort them out.
1.Low pressure in hydraulics. This is arguably the most common problem, which occurs when there is insufficient pressure in the hydraulic system. The remedy for this issue involves increasing the pressure in the system either by adding more fluid or raising engine horsepower.
2.Leaks in the system. Leaks are also common within the hydraulic systems. If such happens, fluid would leak out causing low hydraulic pressures and malfunctioning of such machineries as bulldozers, cranes and loaders among others. To solve this issue you’ll need to replace or repair seals that have failed.
3.Damaged parts. Even so if any part of such systems is broken it may bring about machinery problems with it being necessary to fix it by replacing all parts of these systems.’,’Finaly if there has been damage on any part in your Hydraulic System, it can cause problems with machinery but repairing this could involve replacing every single part on it
Cat 303 Hydraulic system overheating
If the 303 Cat hydraulic system has a problem with overheating, there are several ways you can fix it.
Check your systems temperature and pressure levels first. You should then ensure that these two figures are in line with normal operating standards. If not, you have an issue either with your cooling or pump system.
If the temperatures and pressures are within normal ranges, then one or more components in your hydraulic system might need to be replaced. These parts include the cooler, pump and valves.
When all these steps fail to work, then you may have to replace your entire hydraulic system. And of course, if anything is wrong with your Cat 303’s hydraulic system please call a professional technician.
Clogged or restricted Cat 303 Hydraulic lines and fittings
If you have a problem with your Cat 303 hydraulic pipes or fittings, there might be an answer. A obstructed or restrained conduit can sometimes be opened using a plunger.
First of all ensure that the hydraulic line is free from any obstructions for the plunger to be used. Then put the plunger on top of the obstruction and push and pull it until the obstruction has been cleared.
When dealing with the line blockage that cannot be removed by plungers, do not attempt but seek professional help. Remember also that blocked lines can cause loss of power or just stop working completely for your machine. If there’s anything wrong with your tool please contact our customer service personnel.
The pilot Cat 303 Hydraulic valve is broken
In case of the Cat 303 hydraulic valve issues, there are some options that you can try.
One possible solution is trying to mend it by yourself. It may be daunting but with appropriate equipment and knowledge, it is feasible.
Alternatively, one may hire a professional to help. Possibly, this expert will install the new valve instead of repairing it first. By the way, they will determine what made its damage and give advice on what should be done next.
If all those solutions appear not to work out, then valve replacement may be necessary. This could however be an expensive alternative but probably the only one if either it cannot be fixed or isn’t working suitably according to your expectations.
Cat 303 Hydraulic Boom drifting down
If your Cat 303 hydraulic boom is swinging down, a few things you can do to remedy the situation are possible.
Firstly, check the oil levels in the boom. Possibly, low oil levels cause it to swing downwards. You should then fill up by using a hydraulic pump or simply oil bottles attached on the boom.
Another thing you can try is adjusting the cable ties. They might be too tight hence preventing movement of the boom. The tension on them can be eased manually or through use of hydraulic tool.
If none of these remedies works for you, consider replacing your entire boom. For more details about how to replace your boom, kindly consult Cat’s dealer.
Cat 303 Hydraulic is required, click to ask for price
Cat 303 Final Drive Not Working
Whenever your Cat 303 final drive doesn’t work, don’t worry because there are solutions! Here are some of the most common hydraulic problems and their solutions:
1.Low oil level – Whenever there is low oil in the system, it means that the hydraulic system isn’t working as it should. To remedy this, you will have to add more oil into the system. This can be done by putting it through the reservoir or by adding a filter on-line.
2.Damaged seals – If the seals get damaged water will flow inside and spoil it even more. You’ll need to replace these ones to fix the problem. You can do this going to mechanics or using a sealant kit.
3.Failed pump – A failed pump results in low oil levels and other issues. It requires replacement of the pump which might be done by visiting a mechanic or utilizing a replacement part kit.
4.Clogged lines – When lines are clogged up water does not flow through them well hence causing low oil levels among others. So, for you to be able to fix this situation you need to clear out those using either plunger/snake bite tool .
Related Reading
CAT Hydraulic Pump Troubleshooting Guide
English
Russian
French
German
Portuguese
Spanish